QIPANG GS-15S high frequency spark tester for wire and cable insulation wrapper tester

for the online insulation testing of wire and cable industry. It can detect the defects such as pinhole, air gap and crack in the insulation layer of wire and cable surface invisible to the naked eye.
   It has defect record and sound and light alarm system.When a defect is found, it will automatically record the defect data together and generate a sound and light alarm. It can also trigger the relay to control the external alarm system and send the defect record data to PLC or PC workstation through the rs-232/422/485 full-duplex serial port in time for online control.

Working conditions:
 Model: GS-15 s
 Power supply: AC200-240v 50/60hz
 Ambient temperature: -5°C-50°C
 Relative humidity: 20%-85%
 Power: 150 w or less
 Note: the spark should be grounded reliably

Technical indicators:
 Output voltage: 0-15kv (sine wave with effective value)
 Voltage display: 3-bit digital tube display 0.0-15.0kv, voltage regulation step length 100V
 Number of defects display: 5-bit digital tube display
 Test wire diameter: MAX25mm
 Test frequency: 2500-3500hz, varying with the equivalent load capacitance
 Electrode form: bead chain, in accordance with UL1581 standard
 Electrode length: 50mm
 Test mode: manual and automatic
 Automatic leak detection recovery time: less than 20ms
 Sensitivity: set 3KV, use the breakdown equipment to break down 20 times, not more than not more than remember, the breakdown current is no more than 600 A
 Output current: 4mA resistive, 40mA capacitive
 Maximum allowable linear speed: 3067m/min, in line with BS5099 and CCC standards1000m/min, in line with UL1581 and CSA standards
 Output contact: 250V 2A
 Serial communication: rs-232 rs-422 optional
 Maximum communication range: 300m
 Electrode cover safety interlock switch protection device